Please note: This page contains affiliate links. If you purchase from a partnership site, I may earn a commission.

Embellished T-shirt Skirt with Cricut Iron-on Cutouts

Written by: | Published: April 24, 2013 | Updated: June 05, 2017

I recently was invited to jump in and get creative with another round of Cricut Iron-on. It’s a new film product that is a similar to an iron-on vinyl that you cut with your Cricut machine and then iron on to any kind of fabric. The challenge this week is to create something wearable to feature this great craft material. Each designer was sent a selection of Cricut Iron-on and blank t-shirts. So, you know I love me a cute t-shirt skirt, so here’s another variation.

Cute t-shirt skirt with Cricut Iron-on accents
Cute t-shirt skirt with Cricut Iron-on accents

 

T-shirt Skirt with Cricut Cutouts by Jen Goode
T-shirt Skirt with Cricut Cutouts by Jen Goode

 

Materials you will need:

  • Cricut cutting machine with Cricut Craft Room account (and computer)
  • Cricut Iron-on film in yellow
  • Iron
  • Big white t-shirt
  • 1″ wide (or smaller) Elastic
  • Rit Dye
  • For Dying you’ll need bowls, gloves and a spoon
  • Old towel or other material to protect your work area while dying
  • Sewing machine and/or needle and thread
plain white t-shirt
plain white t-shirt

How to make a T-shirt Skirt embellished with Cricut Iron-on cutouts:

  1. Start with a plain old big white t-shirt. Cut off the top of the shirt right under the armpits. The bottom of the shirt will become the skirt, the top is the extra fabric used to embellish the skirt.
  2. Dye the fabric as desired. I chose to go with a yellow to teal color transition. Always dye your light colors first, so I started with yellow. Then used aqua and then teal. I wanted a bit of a faded color, so after dipping the color I rinse a bit before, microwaving to set and then rinsed again. I also dyed a second shirt solid yellow so I would have extra yellow fabric to work with if I wanted.
  3. Dry the fabric on high in the dryer. Wash and dry again before using to make your finished skirt. While the fabric is drying, select your cutting designs from the Cricut Craftroom (or your cartridges) and cut them out of the iron-on film.
  4. Add a waistline to your skirt by sewing along the top of the t-shirt body and running elastic through it. Sew in place. I like to sew the end to show on the outside of the skirt for an extra layer of color, however, you can sew on the inside instead if you prefer.
  5. Cut strips of fabric from the top of the shirt. Sew strips on around the entire skirt.
  6. Make flowers or other shapes with the remaining fabric, sew on as desired.
  7. Finally, apply your prepared Cricut Iron-on cutouts. As a final touch, you can sew on little scrap fabric ribbons or bows if you’d like.
Use Rit Dye to color the t-shirt fabric
Use Rit Dye to color the t-shirt fabric

To dye the fabric: Dip shirt in one color at a time. Dip in the color, rinse. Dip in color, rinse, repeat. Then, wrap the entire piece of fabric in plastic wrap, microwave on high for 2 minutes. I always place the wrapped fabric in a microwave safe bowl just incase it leaks in the microwave, then I don’t end up with dye o the microwave turntable. Let it cool for a minute or two and then rinse in cold water.

Tip: If you are using distinct colors like I have here, rinse the dark color in cold water and then the light color so the color doesn’t become muddy.

Before I start sewing, I always lay out all the pieces to determine what I want my design to be. I play with placement and move things around until I like what I see. The color might look different in this photo… I’m a late night creative thinker!

It helps to have sewing straight pins on hand, pink things in place so they stay where you want them.

Skirt layout details and accents
Skirt layout details and accents

Let your Cricut create the art accents!

Instead of going with big complicated cut out designs, I used my Cricut mini and yellow Iron-on film to cut out simple designs. I then scattered cutout butterflies and flowers all around the skirt, alternating placements to accent the entire piece. This t-shirt skirt can become wearable art you create yourself, so get creative with it!

 

Iron-on butterfly cut out made with the Cricut mini
Iron-on butterfly cut out made with the Cricut mini

 

Pretty little flower cut out using the Cricut
Pretty little flower cut out using the Cricut

 

Cut shirt made from a t-shirt
Cut shirt made from a t-shirt

I like showing off the rough edges when I create this kind of skirt. I think it adds character and interest. So I sew along the edge when applying the strips of color, and then the edge will curl. You can, however, sew however you’d like. I’d also hand sewn with embroidery floss and created a design to the strips. I also created floppy flower cutouts that I sewed on, see ’em?

Don’t forget the Cricut bonus deal:

As part of this special product launch, Cricut has a special promotion with some EXCELLANT pricing available. There’s a few product bundles you’re going to want to get your hands on – save yourself some cash and grab some new creative fun. First there is the Cricut Iron on bundle – Get $15 off your Cricut Iron-on Sample Pack!. Or if you don’t have a Cricut machine yet, you can get the Iron on PLUS a Cricut cutting machine and save over $100! Get the Cricut Iron-on Bundle for $199.99 (normally $319.95)!

 

Make a cute skirt from a t-shirt
Make a cute skirt from a t-shirt

 

If you need more help using the Cricut Iron-on, check out my other tutorial, making collage art with Cricut Iron-on. You could also make a button embellished t-shirt skirt and add accents with your Cricut. So many possibilities, love it!

You can make your own skirt in any color combination you’d  like. Add fun strips of color and then apply Cricut Iron-on cutouts using your Cricut machine . You can decorate your skirt however you’d like, making it as unique as you are! I hope you try the Cricut Iron-on, it’s amazing what you can do with it! Stop by the Cricut site to see what other brilliant wearable art you can create! I was provided with some of the Iron-on film to try out for this challenge, but the rest… was all my creativity.

Show and Tell! What fun do you have with your Cricut?

« previous post

next post »

Jen Goode Headshot

Jen is Passionate about Creativity. She is the owner and "doodle in charge" of JGoode Designs, a Denver based design studio. She is an illustrator, mixed media artist and creative lifestyle blogger. Jen has been a creative professional since 1998 but says she's been an artist since she was old enough to eat glue.

Connect:
Facebook iconTwitter iconPinterest IconInstagram IconFeed Icon
Join the FREE Creative Club!

Get tutorials, free file downloads and project ideas right in your email.

4 thoughts on “Embellished T-shirt Skirt with Cricut Iron-on Cutouts”

  1. Adorable skirt! I’m unclear about the waistband, though. Is the elastic waistband a separate piece that is sewn on or is it created by folding the top of the fabric over?

    Reply
    • Hi Sandy, either would work. I’ve made this skirt both ways.. it all depends on how big the t-shirt is that you start with. My preference is folding the top down and then letting the folded edge show unfinished… I like the bit of ruffle look it adds to the skirt. For this skirt specifically, the top is just folded down.

      Reply

Leave a Comment

Featured on:
Brands Jen at 100 Directions has partnered with.
100 Directions is full of tutorials and project ideas to inpsire trying something new and sharing creativity in every direction.
I work with a variety of companies to share ideas and insight about products, services and all kinds of fun, creative things to do.
I stand behind my recommendations and hope you love the things I share as much as I love sharing them with you!

 

Privacy Policy and Disclosures | Work with me

 

100 Directions is a JGoode Designs property. Copyright © 2011-2024 Jen Goode. All Rights Reserved.

100directions.com is a JGoode Designs property. Owned and operated by Jen Goode.